This model has been discontinued. Check out the Morgana AutoCreaser Pro XW
The new AutoCreaser Pro 385 can be linked to the AutoFold Pro to provide the complete solution to the problem of cracking that occurs when folding digitally printed output. It is equally effective in dealing with conventionally printed card, laminates or cross-grained stock.
The AutoCreaser Pro 385 features dual creasing blades and matrix that can run up to 8,500 sheets per hour. The AutoCreaser Pro now features a high capacity feeder for longer runs, ideal for digital and litho printed work. The AutoCreaser Pro 385 provides the complete solution to the problem of cracking that occurs when folding digitally printed output. It is equally effective in dealing with conventionally printed card, laminates or cross-grained stock.
The AutoCreaser Pro 385 is equipped with the very latest in technology to enable automatic set up of jobs, including setting of all feeder functions, by selecting a few simple parameters on the Morgana SmartScreen touch screen control panel. The new deep pile feeder allows tacking of up to 450mm of paper to enable longer runs and is equipped with a SmartStep table drop for fast loading of shorter run jobs.
Paper feeding is controlled by a new vacuum top feeding drum that can automatically change between a wide range of paper types and thickness with little operator intervention.
An additional feature of the AutoCreaser Pro 385 is the dual blade and matrix system. This allows operator s to select "up" and "down" crease profiles in one pass, particularly useful when producing covers for perfect binding, or to carry two different crease widths to quickly and easily change from heavy to lightweight stock, once again, by simple selection from the SmartScreen. All Morgana crease and matrix sets are guaranteed for the life of the machine.
The AutoCreaser Pro 385 is controlled entirely by the latest version of the Morgana's SmartScreen touchscreen control. The sheet size is entered, along with finish fold type - all other functions are then set automatically by the machine, including the air separation, side glue position, crease positions and table height.
For non-standard sheet sizes or fold types, an alpha-numeric memory allows an unlimited number of jobs to be stored and named as you choose, making job recall much easier using your own job name and numbers.
Up to 8,500 A4 sheets per hour can be produced with the crease position accurate to +/- 0.1mm, with a maximum sheet size of 385 x 700mm. Up to 16 creases per sheet can be placed as close as 1mm a part.
Perforation comes as standard on the AutoCreaser Pro range with a wide variety of wheels available to suit all. An optional side/stop perforating unit can be added for more complex jobs.
- Crease and fold without cracking
- Intuitive SmartScreen touch screen control
- Takes stock up to 0.4mm (approximately 400gsm)
- Maximum sheet size 385mm x 700mm
- Suction feed top feeder
- Deep pile 450mm capacity feeder
- SmartStep table drop
- Up to 16 creases per sheet
- Creasing blade and matrix guaranteed for life
- Dual creasing blades
- 8,500 sheets per hour
- In-line perforating as standard
|Maximum Sheet Size:||700mm x 385mm|
|Minimum Sheet Size:||210mm x 148.5mm|
|Maximum Paper Thickness:||0.4mm (approximately 400gsm)* including laminated material|
|Minimum Paper Thickness:||16|
|Maximum Number of Programmed Applications:||50|
|Minimum Repeat Crease Distance:||1mm (Depending on Paper Weight)|
|Minimum Crease Distance from Lead Edge:||2.5mm|
|Minimum Crease Distance from Tail Edge:||2.5mm|
|Speed per hour:||8,500 sph (A4), 11,000 sph (A5)|
|Dimensions:||L 2129mm x W 660mm x H 1235mm (approximately)|
|Power Requirement:||100-240v 50/60hz|